Other trade jobs in the Boston, MA metro area

16 open positions

Showing jobs across the Boston, MA metro area. Browse all locations

Funding is available for training

Environmental Specialist I

Veolia Environnement SA

Cambridge, MA, United States · $21-$24 per hour.

**The work** - Sample, package, label and document hazardous waste for transport and disposal. - Load/unload materials, support spill cleanup and remediation, and operate equipment under environmental and transport safety rules. **Benefits** Health, dental, vision and life coverage; paid time off; retirement/savings programs; tuition reimbursement and paid volunteering. Source: Veolia Environnement SA employer posting.

View

Electrical Engineer II

Wabtec

Waltham, MA, United States · Pay Range $83,000 - $110,000 base salary depending on experience plus 7.5% annual bonus target.

Wabtec is hiring a Electrical Engineer II in Waltham, MA. The employer describes the work as follows. **Key responsibilities** - In an agile R&D development environment, the incumbent carries out electronic design as part of the maintenance and development of new products related to test and measurement market. - Participate in the development of electronic concepts; - Participate in the characterization of the electronic performance requirements of the system (norms and standards, etc.); - Participate in the characterization of manufacturing, assembly and after-sales service requirements, in collaboration with operations; - Define and perform electronic design of subsystems; - Manage the technical risks of development under their responsibility; - Participate in electronic product design reviews; - Perform signal integrity analysis on signals/buses between two components of a given subsystem;

View

Scientist, Formulation Chemistry

Eurofins

Cambridge, MA, United States · $32-$36 per hour

Eurofins PSS is seeking a highly motivated scientist to support the client’s Early Formulation Science and Drug Delivery group. The candidate will work directly on a client site in Cambridge, MA and the role requires daily onsite presence, five (5) days per week. This position will collaborate directly with group project leads and, in some cases, client Pharmacology/Biology scientists. This scientist will support the development of stage-appropriate traditional and enabled formulations for pre-clinical studies. This role will also be responsible for conducting basic in vitro experiments and basic in silico predictions, in addition to basic material science and physicochemical properties assessments of early drug candidates. This role includes both laboratory measurements and basic data interpretation to inform bio-performance and stability risks for development of oral small molecule drug candidates. **ROLE RESPONSIBILITIES** - Prediction and experimental evaluation of physicochemical properties of potential small molecule drug candidates (solubility and chemical/physical properties) - Contribute to the development and evaluation of fit for purpose, standard and enabled formulations for preclinical studies (oral, subcutaneous, intravenous, etc) - Perform dissolution / precipitation/ flux studies of drugs in biorelevant conditions - Support laboratory experiments for novel research efforts in the area of pharmaceutics and biopharmaceutics.

View

Engineering Technician, Mechanical

Form Energy

Somerville, MA, United States · $35.88 – $43.99 per hour

The Advanced Product Development team at Form Energy is hiring a Engineering Technician with a mechanical focus for our team in Somerville, MA. This role is embedded directly in the APD engineering team and supports the mechanical build-out of battery test systems and prototype hardware that enable the development of Form Energy’s multi-day batteries. A successful candidate can work independently with limited instruction and can give design feedback and suggestions to engineers. The ideal candidate has very strong mechanical intuition, understands prototyping, and can build and commission first-of-a-kind test hardware. This is an exciting opportunity to be part of the growth of a fast-moving company with breakthrough technology and an incredible mission!

View

Transducer Manufacturing Engineering Co-Op

Wabtec

Waltham, MA, United States · $24-$26 per hour

Wabtec is hiring this full-time Transducer Manufacturing Engineering Co-Op role in Waltham, MA. The employer describes the work as follows: The Transducer Manufacturing Engineering Co-op will assist the Transducer Production Engineering department with design, testing, and documentation. The Co-op will be a member of a multi-disciplinary team comprised of manufacturing, electromechanical, and acoustic engineers.

View

Bioanalytical Development Scientist - Group Leader

Eurofins

Boston, MA, United States · $38-$46 per hour

Eurofins is hiring this full-time Bioanalytical Development Scientist - Group Leader role in Boston, MA. The employer describes the work as follows: **Position Overview:** Our Eurofins PSS team is seeking an Analytical Development Scientist Group Leader to work onsite supporting our client's analytical development activities across product characterization, process development, and analytical method execution for lentiviral vector (LVV)-based gene therapy products. The successful candidate will focus on potency assay development, optimization, and method transfer activities while partnering with internal and external laboratories to establish robust, phase-appropriate analytical methods.

View

Bioanalytical Development Scientist - Viral Vectors

Eurofins

Boston, MA, United States · $32-$36 per hour

Eurofins is hiring this full-time Bioanalytical Development Scientist - Viral Vectors role in Boston, MA. The employer describes the work as follows: **Position Overview:** Our Eurofins PSS team is seeking an Analytical Development Scientist to work onsite supporting our client's analytical development activities across product characterization, process development, and analytical method execution for lentiviral vector (LVV)-based gene therapy products. The successful candidate will focus on routine analytical testing, data generation, and assay execution.

View

Drug Product Formulation Scientist

Eurofins

Boston, MA, United States · $32-$41 per hour

Eurofins is hiring a Drug Product Formulation Scientist in Boston, MA. Employer-described work includes: **Position Overview:** Our Eurofins PSS team is seeking a Drug Product and Formulation Scientist to work onsite supporting our client's Drug Product and Formulations development activities for lentiviral vector (LVV)-based gene therapy products. The successful candidate will help design and execute bench-scale experiments and contribute to technical documentation for drug product development. This role will parter closely with process development, analytical development, and technical operations teams, operating with moderate supervision while building toward independent ownership of formulation and drug product workstreams. This is an excellent opportunity for a motivated scientist to build formulation expertise on a novel gene therapy program. **Responsibilities:** - Support formulation and drug product development activities by executing studies to: - Optimize formulation buffer via buffer/excipient screening, using accelerated stress and long-term storage stability studies to assess and improve conditions that support vector stability. - Develop and optimize product filtration methods (e.g. sterile filtration compatibility, membrane selection, filter fouling/throughput studies), evaluating impact on vector recovery. - Enable and optimize GMP-compliant drug product manufacturing workflows, completing studies related to (but not limited to) scale-up, in-process hold times, fill/finish, and container closure evaluation. - Evaluate in-use compatibility (e.g., shelf-life, clinical formulation, and infusion set hold time studies) supporting clinical administration of the drug product. - Perform biophysical characterization of the vector (e.g., particle analysis via HIAC) and support development and optimization efforts for new characterization methods (e.g. FlowCam or NanoFCM) as needed. - Support the technology transfer efforts by preparing documentation, data packages, and coordination of materials for internal teams or CDMO partners - Maintain accurate, compliant lab notebooks, data records, and sample tracking in a GLP environment. - Draft protocols, study summaries, and technical reports, with guidance and review from senior team members. - Contribute to regulatory filings (e.g. CMC sections of IND/CTA) as needed. - Present data at technical forums.

View

Downstream Process Development Scientist

Eurofins

Boston, MA, United States · $32-$36 per hour

Eurofins is hiring a Downstream Process Development Scientist in Boston, MA. Employer-described work includes: **Position Overview:** Our Eurofins PSS team is seeking an Downstream Scientist to work onsite supporting our client's downstream process development activities related to the production of sterile, injectable lentiviral vector (LVV)-based gene therapy products. The successful candidate will help support support purification process definition and optimization, process robustness studies, and process transfers to pilot plant and manufacturing sites, and authorship of downstream process development technical documentation. This role partners closely with cross-functional teams across the CMC project teams to support all upstream operations for the client's program. This is an excellent opportunity for a detail-oriented scientist to contribute directly to the development of novel gene therapy products from an established, hands-on downstream role. **Job Responsibilities:** - Support the execution of purification development and characterization experiments. - Collaborate with cross-functional teams to coordinate analytical testing, exchange materials, share technical observations, and align on project timelines. - Support transfer of purification processes to pilot plant and manufacturing sites. - Maintain lab stocks, supplies, and equipment specific to the downstream team to support daily operations - Document process data in electronic lab notebook and shared databases and communicate key observations in team meetings.

View

Upstream Process Development Scientist

Eurofins

Boston, MA, United States · $32-$36 per hour

Eurofins is hiring a Upstream Process Development Scientist in Boston, MA. Employer-described work includes: **Position Overview:** Our Eurofins PSS team is seeking an Upstream Scientist to work onsite supporting our client's upstream process development activities related to the production of sterile, injectable lentiviral vector (LVV)-based gene therapy products. The successful candidate will help support the execution and optimization of LVV production protocols, maintenance of mammalian suspension cell culture systems, process robustness, and yield-improvement studies. This role partners closely with cross-functional teams across the CMC project teams to support all upstream operations for the client's program. This is an excellent opportunity for a detail-oriented scientist to contribute directly to the development of novel gene therapy products from an established, hands-on upstream role. **Job Responsibilities:** - Execute LVV production protocols using shake flasks and benchtop bioreactors to support ongoing process development and characterization studies. - Support routine maintenance of suspension cell cultures, applying strong aseptic technique and sterile workflow practices to preserve culture health and integrity. - Collaborate with cross-functional teams to coordinate analytical testing, exchange materials, share technical observations, and align on project timelines. - Maintain lab stocks, supplies, and equipment specific to the upstream team to support daily operations. - Document process data in electronic lab notebook and shared databases and communicate key observations in team meetings.

View

Metering Technician

Veolia Environnement SA

Boston, MA, United States · $26.00-$28.85 per hour

Veolia is hiring a Metering Technician in Boston, MA. This field role commissions, programs, tests and troubleshoots electrical, thermal and water meters and remote data-collection hardware at commercial, residential, industrial and government facilities.

View

Production Assembly Technician

Anduril Industries

Waltham, Massachusetts, United States · $37.02 — $49.03 USD (hourly)

Hands-on production role assembling, aligning, and testing precision electro-optical and electro-mechanical sub-assemblies and finished systems. The technician will execute detailed manufacturing instructions, use calibrated tooling and precision metrology, document build and inspection records, troubleshoot hardware with engineering partners, and maintain ESD- and contamination-controlled work areas.

View

Production Technician - Second Shift

Commonwealth Fusion Systems

Somerville, MA, US · USD $30 - $41 per hour

Join the manufacturing team building and testing superconducting magnets. The Production Technician on second shift performs electromechanical assembly and testing, maintains and troubleshoots production equipment, follows procedures and drawings, and works with Operations, Maintenance, and Quality to support continuous improvement and safe production.

View

Maintenance Technician I

Veolia Environnement SA

Lynn, MA, United States · $25.00 to $32.00 per hour.

Entry-level maintenance technician role at a water/waste operations site performing routine and preventive maintenance, basic troubleshooting and repairs across mechanical, electrical and facility systems. Work includes servicing pumps, valves, conveyors, chemical feed and treatment equipment, performing facility upkeep, operating plant vehicles, and participating in on-call rotations and required safety training.

View

Production Technician - Third Shift

Commonwealth Fusion Systems

Somerville, MA, US · $30 - $41 per hour + 15% differential (USD)

Work on a night shift manufacturing team to build, assemble, test, and maintain electromechanical components and superconducting magnets. The role focuses on production builds to specification, troubleshooting manufacturing issues, performing preventative equipment maintenance, and collaborating with operations, quality, and maintenance to support continuous improvement.

View

Production Technician - First Shift

Commonwealth Fusion Systems

Somerville, MA, US · USD $30 - $41 per hour

Join a manufacturing team that assembles and tests superconducting magnets. The Production Technician performs electromechanical builds, operates production and test equipment, troubleshoots manufacturing issues, supports preventative maintenance, and works closely with Operations, Maintenance and Quality to improve processes. The role operates on a 6:00 am–3:00 pm first shift schedule at CFS's Somerville facility.

View